Antenna Mounts
1 - 18 (of 18 products)
View Page: 1
3/4-Inch NMO Mount L Bracket
Made of stainless steel • For trunk or fender groove • Includes mounting screws
3-5/8-Inch NMO Magnet Mount with Rubber Boot and Preinstalled UHF PL-259 Connector (Black Zinc Housing)
Solid brass NMO with gold contact pin • Soft rubber boot on magnet for scratch protection • 17 ft. RG58A/U cable with tinned copper braid 95% and stranded tinned copper center conductor • Preinstalled UHF male PL-259 connector with strain relief • Black zinc magnet housing
3-5/8-Inch NMO Magnet Mount with Rubber Boot and Preinstalled UHF PL-259 Connector (Chrome Zinc Housing)
Solid brass NMO with gold contact pin • Soft rubber boot on magnet for scratch protection • 17 ft. RG58A/U cable with tinned copper braid 95% and stranded tinned copper center conductor • Preinstalled UHF male PL-259 connector with strain relief • Chrome zinc magnet housing
3/4-Inch Fully Enclosed NMO Hole Mount with Preinstalled UHF Male PL-259 Connector
Fully weatherized, fully shielded zinc housing • Solid brass NMO ring with gold contact pin • 17 ft. RG58A/U cable with tinned copper braid 95% & tinned copper-stranded center conductor • Preinstalled UHF male PL-259 connector with strain relief • High frequency, low loss up to 1.5 GHz
3/4-Inch NMO Hole Mount with Preinstalled UHF Male PL-259 Connector
Solid brass mount with gold contact pin • 17 ft. RG58A/U cable with tinned copper braid 95% and stranded tinned copper center conductor • Preinstalled UHF male PL-259 connector with strain • Low loss to 1,000 MHz
5-1/2-Inch Black ABS NMO Magnet Mount with RG58 Coaxial Cable and SMA Connector
5-1/2 in. black ABS housing • Solid brass NMO base with gold contact pin • Soft rubber boot on magnet for scratch protection • 17 ft. RG58 coaxial cable with tinned copper braid 95% and solid copper center conductor • SMA-male connector installed
5-1/2-Inch Black ABS NMO Magnet Mount with RG58 Coaxial Cable and UHF PL-259 Connector
5-1/2 in. black ABS housing • Solid brass NMO base with gold contact pin • Soft rubber boot on magnet for scratch protection • 17 ft. RG58 coaxial cable with tinned copper braid 95% and tinned copper-stranded center conductor • UHF/PL-259 connector with strain relief installed
5" NMO Magnet Mount
Solid-brass black NMO mount • Gold-plated solid brass contact pin • Soft rubber boot on magnet for scratch protection • 17ft RG58A/U low-loss precision coax cable, tinned copper braid 95% shield, solid insulation & stranded tinned copper center conductor • Precision UHF male PL-259 connector with strain relief…
NMO 3/4-Inch Hole Mount with RG58 Cable and SMA-Male Connector
Fits 3/4 in. hole • Solid brass NMO mount with gold-plated contact pin • Low loss up to 1,000 MHz • 17 ft. RG58 low-loss precision coaxial cable with bare copper braid 95% shield, solid insulation, and solid bare copper center conductor • Preinstalled precision SMA-male connector
NMO 3/8-Inch to 3/4-Inch Hole Mount with RG58 Cable and SMA-Male Connector
Fits in 3/8 in. to 3/4 in. hole • Solid brass NMO mount with gold-plated contact pin • Low loss up to 1,000 MHz • 17 ft. RG58 low-loss precision coaxial cable with bare copper braid 95% shield, solid insulation, and solid bare copper center conductor • Preinstalled precision SMA-male connector
NMO 5" Magnet with Soft Rubber Boot, 17ft Cable, PL-259
Black magnet housing • Solid brass NMO • Gold plated contact pin • Soft rubber boot on magnet for scratch protection • 17ft low-loss RG58 A/U coax cable: tinned copper braid 95%, solid insulation, stranded tinned copper center conductor • PL-259 male connector installed
NMO Mirror Mount Kit with 17ft Coaxial Cable
Stainless steel mirror mount & bolts • Chrome-plated brass NMO • Gold-plated contact pin • RG58A/U premium cable, 95% tinned copper shield & tinned copper-stranded center conductor • UHF male PL-259 connector with strain relief installed
NMO Mount to UHF-Female Connector Ground Plane Kit
200 watt power rating • Makes mobile antenna with NMO mounting into ground plane base station • 20-1/2 in. ground plane radials • 100 MPH wind load • Easy to install on any 2 in. pole or pipe • Includes mounting hardware
NMO to 3/8-Inch x 24 Adapter
Adapts any NMO mount to 3/8 in. x 24 thread mounting • Chrome-plated brass mount • Chrome-plated brass heavy-duty base • Gold-plated plunger-type contact pin • O-ring type gasket
Premium 3-5/8-Inch NMO Magnet Mount with Rubber Boot and Preinstalled SMA-Male Connector
Black zinc magnet housing • Solid brass NMO with gold contact pin • Soft rubber boot on magnet for scratch protection • 17 ft. RG58A/U cable with bare copper braid 95% and solid insulation & copper center conductor • Preinstalled SMA-male connector
Stainless Steel UHF to UHF Mirror Mount
UHF-female to UHF-female • Stainless steel mount and hardware
Up to 3/8-Inch Adjustable Trunk Mount with Preinstalled UHF PL-259 Connector
Fits up to 3/8 in. surfaces • Stainless steel mount • Solid brass NMO with gold contact pin • 17 ft. RG58A/U cable with tinned copper braid 95% and stranded tinned copper center conductor • UHF male PL-259 connector with strain relief installed
Up to 3/8-Inch Adjustable Trunk Mount with Preinstalled UHF PL-259 Connector with FME-Female Attached
Fits up to 3/8 in. surfaces • Stainless steel mount • Solid brass NMO with gold contact pin • 17 ft. RG58A/U cable with tinned copper braid 95% and stranded tinned copper center conductor • UHF male PL-259 connector with strain relief installed • Easy screw-off UHF PL-259 for small hole installation…
1 - 18 (of 18 products)
View Page: 1